E X C E E D I N G   T H E   S T A N D A R D
 

Home

Online Store

Distributors

Educators

  

Support


The OneUp truly has world class linear motion hardware.

The linear rods are precision ground, chrome plated and induction hardened 4140 steel and are coupled to precision linear bearings.

Machined ACME screws and brass ACME nut drive the Z-Axis allowing consistent and accurate movement.

The OneUp also use HTD reinforced belts to drive the X and Y axis so there is no chance of slippage or backlash when tensioned properly.


What's better than having to solder or crimp connections together?...already having it done for you!

All electrical connections on the OneUp are already crimped inside Molex housings, all you have to do is plug them in!


The Anubis hotend included in the OneUp is made for the first time 3D Printer user!

Utilizing a PTFE insert inside the PEEK barrel creates a lubricious pathway that insulates the filament thus preventing pre-softening and jamming of the hotend.

A high performance 40w heater cartridge reaches full temperature in about a minute and has enough power to tackle high-speed printing with a max temp of 250c.

Each hotend comes with a user replaceable .40mm nozzle for the best performance and quality in a variety of printing situations.

The Lowest Point of Entry to 3D Printing, Period! ...and it Comes in Exciting Colors!


The OneUp is the cheapest 3D printer in the world. At $199 for a self assembled kit, that includes everything you need, the OneUp is the easy choice to 'get your feet wet'.

All corners of the internet recommend a self built printer as your first printer so you learn the ins and outs, the ups and downs of 3D printing before making a big purchase. Professional quality prints are a reality, equivalent to much more expensive machines at competitive speeds with the ability to expand the build area at at any time after purchase for only $79 (buy the TwoUp upgrade now in our online store!).

Each kit includes a very reliable and forgiving extruder, that makes it easy to get great quality prints with minimal effort.

The OneUp is optimized for PLA printing but with the optional heated bed upgrade, ABS and Nylon printing are a breeze!

This is a Do-It-Yourself, Self-Assembly kit that generally takes 2-8 hours to assemble based on end user skill level.

The only difference between the OneUp, TwoUp and ThreeUp is the build area, every other spec is the same.


     

 

DIY ASSEMBLY DISCLAIMER

Q3D cannot guarantee the electronic and mechanical proficiency of its customers or 3rd party users. The attentiveness to the assembly instructions and natural proficiency will determine the quality and speed of the output from this machine. Your results will vary from others who have assembled an identical kit depending on the relative skill of assembly and calibration. We encourage you to download the assembly, calibration instructions before purchasing this kit.

Further reading DISCLAIMER OF ASSEMBLY

Kits that have been assembled, used, connected electrically or mechanically or otherwise affected will not be eligible for refund. Only brand new, unbuilt, unaffected kits will be eligible for refund within 30 days of receipt less a 20% restocking fee.

Further reading RETURN POLICY

Q3D guarantees all mechanical and electrical components for a period not exceeding 30 days of receipt. If you have received a kit with defective or missing components with the 30 day warranty period please contact us by issuing a SUPPORT TICKET. The component must be deemed defective by Q3D in order to receive a replacement.

-Q3D Team

 

  General Printing

  Technology: Fused Filament Fabrication

  Build Area Inches:

  3.94 x 3.94 x 4.92

  Build Area MM:

  100mm x 100mm x 125mm

  

  Print Quality

  Layer Resolution: 50 Microns

  Filament Diameter: 1.75mm

  Nozzle Diameter: .40mm

  Minimum Feature Size: .20mm

  Maximum Extruder Temperature: 250c

  

  Mechatronics

  Frame: Laser Cut Melamine or Acrylic

  Build Surface: Melamine or Acrylic

  Linear Shaft: Ground, Chromed,
  Hardened 8mm

  Z-Axis Screw: Precision ACME

  Electronics: Printrboard

 
             
 

  Operating Environment

  Ambient Operating Temp:

  15-32C [60-90F]

  Storage Temperature:

  0-40c [32-104]

  Humidity: <50% Optimal

  

  Software

  Control: Repetier Host

  Slicing: Slic3r

  File Types: STL, OBJ

  OS: Windows, Mac, Linux

  Interface: USB, SD CARD

  

  Electrical

  Power: 100-240v, 50-50hz

  Current: 100w, 150w w/ Heated Bed

  Voltage: 12v

  Plug: NEMA 15-5



  
             
 

Manual

Downloads

  

F.A.Q.

  

Warranty, Support, Return Policy
& Disclaimer of User Assembly

  
             

© 2014 Quintessential Universal Building Device, Inc.